Is it possible to install this by yourself? if not, how much would it cost to have it installed?

• Yes, this garage was designed as a DIY project and can be assembled with a pair of helping hands. But it is highly recommended that you hire a professional handyman or installer from the websites listed above in the "How to Assemble?" section. If you have any questions or concerns our customer service team is available 7 days a week at 833-766-3300.

Does the garage have a floor to it?

• This garage does not have a floor as we recommend pouring a concrete slab to use as a base.

Can the door be installed on the other side?

• Yes, the door can be installed on the opposite side of the storage unit.

Can you build it on a concrete pad?

• Yes, this can be built on a concrete slab. The slab should be at least 4'' thick. It must be level and flat. Be sure to check the floor measurements for each product.

Can it be wired with a 150A or a 200A wire panel?

• It is not recommended, but if you choose to do so, you need to make sure to check and follow all local building/electrical codes, as well as look at insulating the box from the garage (frame it in wood, insulate it, etc)

Can the roll up door be installed on the side instead of the end?

• Unfortunately it cannot be installed on the side.

Do you need a permit to install this garage on your property?

• You would have to see with your city regulations directly as every city differs.

Does this garage qualify for the wind loads required by every state?

• You would have to check with the state guidelines but the wind rating for this unit is 100mph (this is a reference only and it assumes a securely anchored frame according to local building codes and ordinances. It has been calculated using combined snow and wind load provisions in accordance with ASCE 7-05)

Can this be build without a slab using 30-in rebar ground anchors with concrete piers?

• We do require a concrete slab for this unit. The building’s integrity would be majorly compromised without it, and would make the unit near impossible to put together.

What is the gauge of the metal walls and roof?

• The roof and walls on the Everest are 29 gauge.

Can the walk through door (side door) be placed on either side of the shed?

• Yes the door can be placed on either side BUT it can only go in two locations. The back left OR the right Front. And yes, this shed comes with garage door and side door.

Where do I get the drawings to take to the county to get the building permit?

• To obtain this information you must visit your Town Hall and request a copy of their guidelines. Every county across the nation has different regulations and due to this variance we do not have this information. For the most part permits are not required because these shelters are considered temporary structures but it is best practice to check in with your town.

Does this have a fire rating?

• This unit does not have a fire rating but it is entirely made of steel.

Can a window be added; 1 or 2?

• We, unfortunately, do not offer that option. If you were to do so it would be at your own risk and you would have to reinforce the wall panel where the window would be installed. Also please keep in mind that any modification to the frame would void your warranty. If you would like to discuss this in more detail please feel free to give us a call at 833-766-3300.

Can you install solar panels on the roof? Would it be strong enough to handle 6 panels on each side?

What are the dimensions of the shipping package?

• There are 7 boxes. Box 1,2,3,4 and 5: 97.25 x 32.6 x 4.9 inches / Box 6: 107.9 x 14.25 x 6.4 inches / Box 7: 102 x 25 x 8.4 inches

Can this be staked down to go on gravel?

• Yes, this can be anchored on gravel with the appropriate anchors. 

Can the exterior be painted?

• We would not recommend painting this shed. However, the exterior has already a finish you can still paint it if you want.

Can the garage door be made taller?

• The garage cannot be made taller and if you were to install windows it would be at your own risk and you would have to reinforce the wall panel where the window would be installed. Also please keep in mind that any modification to the frame would void your warranty.